Hard Surface Construction
Hallmark Floors uses TSCA TITLE VI compliant glues for the center-ply in our engineered floors’ hardwood construction. The center veneers are cold pressed, then hot pressed with tremendous pressure. This process makes the center core Eco-friendly, harder and more proportionally stable.
- Higher Stability
- Higher Density
- Higher Strength
- Higher Indoor Air Quality
Truecore® is third party verified and surpasses the emission requirements.
[hr][threecol_two]
Sawn-Cut Style
Experts in the industry agree that sawn-cut provides the best quality, stability & visuals for solid & engineered floors. Sawn-cut engineered floors allow for the thickest veneer (4mm) with the highest degree of stability. Engineered sawn-cut wear layers are the ONLY engineered floors that are equal to solid wood floors.
Sawn-cut is made by cutting the log into thick blanks and then set on edge and sent through a multi blade saw, so that the slices are more perpendicular to the growth rings. This process creates a beautiful wood grain and higher quality product, which is unique to sawn-cut face floors.
[divider_flat]
[/threecol_two][threecol_one_last]
Hallmark Floors’ engineered hardwood floors is constructed with an ultra thick wear layer has the same usable surface as 3/4” solid hardwood flooring, this allows 3 guaranteed sandings.
[hr][divider_flat]
Sawn-Cut Engineered Floors
Superior Wear Layer
Hallmark Floors’ hybrid sawn cut engineered wood floors feature the same wear layer as solid.
[/threecol_one_last][hr]
Slice-Cut Style
Slice-cut features the same beautiful look as sawn cut veneers and is the second most common way to create a wood veneer, it’s just in thinner layers (2mm or less). This creates stunning visuals while still providing stability for engineered wood floors.
How the wood is cut makes a difference in sliced engineered floors. According to experts, in order to produce a better slice-cut veneer, the log should be vertically cut from the top down. As a result, this creates less stress on the veneer during the slicing process and makes the veneer stronger and provides max stability for a variety of environments. For this reason, Hallmark Floors only vertically slice-cuts the wood used for our floors.
[twocol_one]
[/twocol_one][twocol_one_last]
Hallmark Floors engineered hardwood floors feature a 2mm slice cut face layer. This thick wear layer makes it possible to perform 2 guaranteed sandings.[/twocol_one_last]Contemporary Slice-Cut
TrueSlice is a new progressive process developed for the sole purpose of greatly increasing one “Stability”. With a highly stable & thicker face cut TrueSlice greatly reduces the opportunity for checking in dry environments when compared to traditional processing methods.
[hr]
[twocol_one_last]
Hallmark Floors engineered hardwood floors feature a 2mm slice cut face layer. This thick wear layer makes it possible to perform 2 guaranteed sandings.[/twocol_one_last][hr]
Regatta | Spillproof Floor | Waterproof Core Construction
[divider][twocol_one]
• Uni Push Installation
• Spill Proof | 360 Water Loc Protection
• Attached Pad | 62 IIC
[/twocol_one][twocol_one_last]
• Dent resistant Core | 5,000+ PSI
• Heat Resistant | 140º
• FloorScore® Certified
[/twocol_one_last]
[hr]
You will find the different wood educational categories in the sidebar to the right or if you are on a mobile phone, at the bottom below.
