HALLMARK LUXURY VINYL ADHESIVE SYSTEM
HALLMARK 1 PRIMER
Hallmark 1 is an acrylic based sealer that does not contain any solvents, isocyanates or other materials harmful to one’s health. It’s certified Green with very low emissions. Hallmark 1’s main purpose is to decrease the moisture pressure from the subfloor to an acceptable level for flooring installation and to bridge minor cracks. Hallmark 1 spreads easily, creates a dust free surface and prepares the subfloor for installation of flooring.
PRIMER BENEFITS
Improves bonding of:
- Leveling compounds
- Adhesives
- Moisture barrier up to 8 lbs on Calcium Chloride or 85% RH
- Suitable for Radiant Heat
HALLMARK 2 SEALER
Hallmark 2 is a two component epoxy resin based sealer which decreases moisture pressure from a wet slab to an acceptable level for flooring installation. Hallmark 2 will also bridge minor cracks in the subfloor. Hallmark 2 spreads easily, creates a dust free surface and prepares the subfloor for installation of flooring.
SEALER BENEFITS
- Resistant against aging
- Improves bonding of adhesives
- Moisture barrier up to 18 lbs on Calcium Chloride or 97% RH
- Suitable for Radiant Heat
HALLMARK 3 ADHESIVE
Hallmark 3 is a highly specialized Luxury Vinyl Adhesive that has great green tack, high shear & tensile strength & a very long open time. Installation methods for Hallmark 3 range from wet lay method, mid level tacky, or even a traditional drier pressure sensitive installation. Hallmark 3 can even be installed as a wet lay over a concrete slab when installing over existing non-absorbent flooring. Hallmark 3 can be applied directly over Hallmark 1 Primer or Hallmark 2 Sealer. It’s non-hazardous, contains no voc’s, is certified as very low emissions, thus contributing to LEED Points.
ADHESIVE BENEFITS
- Resistant against aging
- No Health Hazards
- Suitable for Radiant Heat
HALLMARK STANDARD 4 ADHESIVE
Hallmark Standard 4 is a highly specialized flooring adhesive specifically designed for Luxury Vinyl Flooring. It has very high shear strength and is very installer friendly. Hallmark Standard 4 contains No VOC’s and due to its Green properties is eligible to contribute to LEED points.
ADHESIVE BENEFITS
- For wet lay installation (not pressure sensitive)
- Very high shear strength
- Contains No VOC’s (eligible to contribute to LEED Points)
HALLMARK ADHESIVE WARRANTY
HALLMARK ADHESIVE SYSTEM DATA SHEET
- Data Sheet for Hallmark’s Primer 1.pdf
Click here to download. - Data Sheet for Hallmark’s Sealer 2.pdf
Click here to download. - Data Sheet for Hallmark’s Adhesive 3.pdf
Click here to download. - Data Sheet for Hallmark’s Adhesive Standard 4.pdf
Click here to download.
TROWEL SIZES
a) Use a 1/16”x1/16”x1/16” for all general installations.
b) Use a 1/32”x1/16”x1/32” trowel if LVT if non-porous floorings (Sheet Vinyl, VCT, LVT, LVP, SVP or thin Rubber flooring) are installed over non-porous sub floors using the dry-lay or pressure sensitive installation.
HALLMARK ADHESIVE SYSTEM MSDS
- MSDS for Hallmark’s Primer 1.pdf
Click here to download. - MSDS for Hallmark’s Sealer 2.pdf
Click here to download. - MSDS for Hallmark’s Adhesive 3.pdf
Click here to down load. - MSDS for Hallmark’s Adhesive Standard 4.pdf
Click here to download.
Hallmark Adhesive System is simply easy
Depending on application and sub-floor condition each component can be used with the adhesive or the adhesive can be used independently.
Hallmark Adhesive System has four components: Primer, Sealer and Adhesives. Providing the best solution to installing luxury vinyl flooring.